JL/JT Currie Enterprises Extreme 60 Front Crate Axle - 4.88 E-Locker (8 LUG-70"W)

The Currie Extreme 60 front axle for your Jeep, is designed for severe off-road use with tires up to 42 inches and V8 horsepower. The high-pinion design features Currie's exclusive rotated center section with ring gear load-bolt, a combination that delivers superior obstacle slide-over and unmatched gear strength. If you seek out the most challenging routes and toughest obstacles to conquer, the Extreme 60 axle set is a natural choice.

SPECIFICATIONS

Details:

Fully Assembled Extreme 60 High-Pinion Front Axle70-Inch Width Provides Improved Clearance for Large Tires

Chromoly Tie Rod with 1-Ton Rod Ends Designed for Off-Road Abuse8-Lug Wheel Bolt Pattern for Ultimate Reliability

Satin Black Powder Coat Finish for Long Lasting Protection

Exclusive Extreme 60 Features:

High-Clearance Center Section with Rotated Cover Improves Obstacle Slide-Over

Ring Gear Load Bolt Prevents Deflection to Deliver Maximum High-Pinion Gear Strength

High Volume Flow-Thru Pinion Oiling System Keeps Bearings Bathed in Cool Oil

Rock Slider Low-Friction Skid Plate Sides Over Trail Obstacles with Ease

 

Notes

ABS Sensors: Does not include ABS sensors, the factory sensors from the stock axle must be retained and installed on the Currie housing.

Computer Programming2012 and newer vehicles require a computer programmer to reset the gear ratio and tire height in the vehicle's computer for the proper function of the vehicle’s stability control system.

Driveshaft: A replacement driveshaft compatible with the larger 60 housing and 1350 yoke is required. Spicer Front Driveshaft is recommended (verify manufacturer vehicle fitment).Wheel and Tire Size: 17-inch or larger wheels are required for proper clearance of the brake calipers.

Wheels must have a 4.9-inch (125 mm) hub bore with a recommended 4.5-inch backspace.

The maximum recommended tire size is 42 inches.

Overall Width: Axle width is 70 inches (+2 inches over stock) between wheel mounting surfaces. Additional width improves turning angle with 37-inch and larger tires.

Steering Stabilizer: The Extreme 60 Ram assist bracket requires an aftermarket stud-style trac bar bolt to accommodate a steering stabilizer.

Trac bar bolts are available from FOX Racing Track Bar Bolt or Synergy Manufacturing Track Bar Bolt.

Differential Carriers: Carriers provided by Currie for the Extreme 60, are turned down to 8.300" O.D. for load bolt clearance. If a standard O.D. carrier is installed the load bolt will need to be backed out to prevent damage.